Wednesday, November 14, 2012
Here’s the procedure on how to manually install the stock ROM (firmware) on Samsung Galaxy Y Duos GT-S6102. Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desired. This has been also useful for unbricking purposes for a bricked, reverting back to original stock or if you needed your device warranty back.This guide is a bit risky for beginners and can only be used by advance users who already had an experience on how to tweak android devices firmware.Now, this procedure is no joke and should be taken seriously for it might results to damage your phone if some mistakes might happen. i’m talking about firmware flashing here, one false move or any interruption will take your device into serious situation that is not too easy to recover.Your phone is not a toy for us, but it is your personal property, you are the only one who can decide on what to do about it.
Disclaimer:
i’m not be held responsible if anything happens to your device by following this guide. Proceed at your own risk!
Needed files and tools
Stock Rom 
ownload From XDA
ownload From XDA Flash Program: Odin 1.85+Pit or Odin 1.87
Driver – You need to install Kies or get the driver of your phone if you have no Kies previously installed.
USB cable – use the supplied USB cable of your Galaxy Y. (Odin will not work Mac and Linux OS).
PC or laptop – running on Windows xp or later OS.
Your Phone – Samsung Galaxy Y Duos GT-S6102
PC or laptop – running on Windows xp or later OS.
Your Phone – Samsung Galaxy Y Duos GT-S6102
Preparation before Flashing
Back-up all of your important data stored in the phone like contacts, messages and etc. Flashing will wipe and delete all of it.
Ensure that your phone is fully charge or above 80% charge. (If your phone had an auto-shutdown history, and its too old, use a newer or good working battery.
Remove the SIM card and the external memory card. (not necessarily but recommended to avoid any certain issues)
Hard Reset – We often do hard reset before flashing to clean the memory cache of the phone. Master reset code*2767*3855# .
Ensure that your phone is fully charge or above 80% charge. (If your phone had an auto-shutdown history, and its too old, use a newer or good working battery.
Remove the SIM card and the external memory card. (not necessarily but recommended to avoid any certain issues)
Hard Reset – We often do hard reset before flashing to clean the memory cache of the phone. Master reset code*2767*3855# .
How to Flash with Multiples files with Pit, Bootloader, PDA, PHONE/MODEM and CSC file
This is full flashing and useful for unbricking for it has a full packaged with individual file allocations, this type of files we often used to fix a bricked Samsung Android devices. Some firmware updates have like this one and some are came into just a single file packaged.
This is full flashing and useful for unbricking for it has a full packaged with individual file allocations, this type of files we often used to fix a bricked Samsung Android devices. Some firmware updates have like this one and some are came into just a single file packaged.
Click on each button and load the appropiate file unto it.
Pit Button – select and load the torino_1205.pit
Pit Button – select and load the torino_1205.pit
u need only 3 file
PDA,Modem,CSC
PDA button – look for the file with the letters PDA or CODE on it,
like PDA_S6102XXXXX.tar.md5 (also .tar support)
like PDA_S6102XXXXX.tar.md5 (also .tar support)
PHONE button- look with the word MODEM file,
like MODEM_S6102XXXXX.tar.md5 (also .tar support)
like MODEM_S6102XXXXX.tar.md5 (also .tar support)
CSC button – associated also with letters CSC or Multi_CSC,
like GT-S6102OXXXXX.tar.md5 (also .tar support)
like GT-S6102OXXXXX.tar.md5 (also .tar support)
There are three checkboxes on the left side of ODIN, the Re-Partition, Auto Reboot and F.Reset Time.
The Auto Reboot and F.Reset Time are often always checked in flashing while the Re-Partition will only be checked if you want to fix the memory partition of the phone, now if you’ll only want to upgrade or downgrade DO NOT CHECK THE REPARTITION.
The Auto Reboot and F.Reset Time are often always checked in flashing while the Re-Partition will only be checked if you want to fix the memory partition of the phone, now if you’ll only want to upgrade or downgrade DO NOT CHECK THE REPARTITION.
DO NOT CHECK RE-PARTITION – Safety for Upgrade and Downgrade
Full Flashing with RE-PARTITION enabled – Advisable only for fixing Soft bricked devices
How to Flash with Only Single file?
Setting up the Samsung Galaxy Y Duos into Download Mode and Connecting to PC.
Setting up the Samsung Galaxy Y Duos into Download Mode and Connecting to PC.
You need to set the device into download mode in order to let Odin recognize it. To set into download mode
Turn OFF the phone, then hold and press the three buttons Volume Down + Home + Power Key simultaneously. If you’ll still not get into download mode, remove the battery a couple of seconds then put it back again and then press the download mode button combination again.
Turn OFF the phone, then hold and press the three buttons Volume Down + Home + Power Key simultaneously. If you’ll still not get into download mode, remove the battery a couple of seconds then put it back again and then press the download mode button combination again.
Download Mode Step 1
Download Mode Step 2
Press Vol up Button To Download Mode
Download Mode Step 3
Download Mode Step 4
Show Download Process
Put Your 3 File (PDA ,Modem ,CSC) File in Odin
Odin Image Step 1
Odin Image Step 2
Start Flashing
Hit the “Start” Button when all are set perfectly to begin flashing.
Hit the “Start” Button when all are set perfectly to begin flashing.
Odin Image Step 3
CAUTION: Avoid touching the phone while the flashing already started, any interruption will result into serious issues like soft-brick or hard-brick.
Let the flashing completes, a progress bar displays until the firmware downloading process finishes. It only takes around 3 to 5 minutes, depends of your PC speed.
When a word “PASS” appears, it means that the flashing is successful. The phone will then reboot and after completely rebooted it is then safe to remove it from computer’s connection.
When a word “PASS” appears, it means that the flashing is successful. The phone will then reboot and after completely rebooted it is then safe to remove it from computer’s connection.
Do a hard reset again by the code *2767*3855# or in recovery mode hold and press Volume UP+Home+Power key. Navigate to the Wipe Data cache/Factory Reset.
Some other tweaks:
1) To check your recent firmware info *#1234#
2) CSC configuration – IMEI number check [*#06#]
3) *#272*[IMEInumber]#
4) Choose sales code
Some other tweaks:
1) To check your recent firmware info *#1234#
2) CSC configuration – IMEI number check [*#06#]
3) *#272*[IMEInumber]#
4) Choose sales code
See Video Here
Similarly You can also install any Flash Rom on Galaxy Y Phone.
First Download & Install Samsung Usb Driver Click Here
For SamSung Galaxy Y Flash Rom Click Here To download &
MirrorLink
Odin Flash Software Click Here To Download
Similarly You can also install any Flash Rom on Galaxy Y Phone.
First Download & Install Samsung Usb Driver Click Here
For SamSung Galaxy Y Flash Rom Click Here To download &
MirrorLink
Odin Flash Software Click Here To Download
Find all rom Samsung Galaxy Y Firmwares Click Here
Thank You.